## Strain and hooke's Law

Subject: Physics

#### Overview

When deforming force is applied on the body, the configuration of the body changes .The change in configuration to the original configuration is known as strain. This note provides us an information on Strain and hook's Law

##### Strain and hooke's Law

Strain

When deforming force is applied on the body, the configuration of the body changes .The change in configuration to the original configuration is known as strain. It may also be defined as the ratio of change in dimension to the original dimension.

$$\text {i.e.} \text {Strain} =\frac {\text {change in configuration}}{\text {original configuration}}$$

It has no unit since it is the ratio of same physical quantity.

Depending upon length or volume or shape of the body has changed, there are different types of strain. They are:

1. Longitudinal strain:
The ratio of change in length to the original length produced under the action of deforming force is called longitudinal strain.

If ‘l’ be the original length of the body and Δl be the change in length produced under the deforming force. Then, longitudinal strain is given by:
$$\text {i.e.} \text {Longitudional strain}=\frac {\text {change in length}}{\text {original length}}$$
$$V.S= \frac {\Delta l}{l}$$
2. Volumetric strain:
The ratio of change in length to the original length produced under the action of deforming force is called longitudinal strain.
$$\text {i.e.} \text {volumetric strain}=\frac {\text {change in volume}}{\text {original volume}}$$
$$V.S= \frac {\Delta V}{V}$$ .
3. Shear strain:
It is the angle through which originally perpendicular plane shifts when tangential deforming force is applied is called shear strain. It is given by
$$\text {i.e.} \text {shear strain} \theta=\frac {x}{l}$$

Elastic limit:
Elastic limit is the upper limit of the deforming force up to which the body can regain its original shape and size completely. Beyond the elastic limit, if deforming force is increased further, the body loses the property of elasticity and is permanently deformed.

Hooke’s law:
Robert Hooke studied the elastic behavior of some material like coiled spring, metallic wires, metallic rods, etc. and summed up the findings in the form of rule known as Hooke’s law. Hooke’s law states that within the elastic limit, stress developed is directly proportional to strain produced.

$$\text {i.e. Stress} \propto \text {Strain}$$

$$\text {i.e. Stress} =\text {E. Strain}$$

where ‘E’ is the proportionality constant called modulus of elasticity

E = $\frac{stress}{strain}$

Experimental verification of Hooke’s law

Consider a spring of length ‘L’ suspended from a rigid support as shown in the figure (i). The spring carries a pan at its lower end so that it can be loaded with different loads. A pointer ‘P’ slides over a vertical scale which gives the position of the spring.

Load is placed on the pan in the steps of 0.5 kg and corresponding readings of the pointer are noted. The difference between these readings with the initial reading gives the extension produced in the spring due to various loads.

When the graph is plotted between different loads or weights and corresponding extensions, a straight line passing through origin is obtained. This indicates that load is directly proportional to extension.

$$\text {i.e. F} \propto \text {e}$$

$$\text {i.e. F} =\text {Ke}$$

Where k is a constant quantity

Dividing both sides by cross-sectional area of the surface

$$\text {or,} \frac FA = \frac {ke}{A} \times \frac LL$$

$$\text {or,} \frac FA = \frac {kL}{A} \times \frac eL$$

$$\therefore \frac FA \propto \frac eL$$

where k, L and e are constant.

Variation of stress with strain (Stress – strain curve)

When a graph is plotted between stress and strain for a metallic wire, stress is directly proportional up to point A and it obeys Hooke’s law. The point ‘A’ is called proportional limit. If stress is increased beyond A up to point B, large strain is less and the wire can regain its original shape and size after the removal of load but Hooke’s law is not obeyed between A and B. The point B is called elastic limit. If stress is increased beyond point B up to C, the wire does not regain its original length and there is permanent set equal to OO’ as shown in the figure. The wire shows both nature, elastic and plastic in between B and C. If stress is increased further beyond C, the strain produced is more up to point D and point D is called breaking point. Beyond D, slight increase in stress can cause the wire to break.

##### Things to remember

When deforming force is applied on the body, the configuration of the body changes .The change in configuration to the original configuration is known as strain.

The ratio of change in length to the original length produced under the action of deforming force is called longitudinal strain.

The ratio of change in length to the original length produced under the action of deforming force is called longitudinal strain.

It is the angle through which originally perpendicular plane shifts when tangential deforming force is applied is called shear strain.

Elastic limit is the upper limit of the deforming force up to which the body can regain its original shape and size completely.

Hooke’s law states that within the elastic limit, stress developed is directly proportional to strain produced.

• It includes every relationship which established among the people.
• There can be more than one community in a society. Community smaller than society.
• It is a network of social relationships which cannot see or touched.
• common interests and common objectives are not necessary for society.