Subject: Physics
Coloumb's Law is applied to calculate the force of attraction or repulsion between two-point charges.
It states that "the force of attraction or repulsion between two charges is directly proportional to the product of charges and inversely proportional to the square of the distance between them."
Figure: Two charges separated by a distance r apart.
Mathematically,
$$F\propto q_1q_2\dots(i)$$
$$F\propto \frac{1}{r^2}\dots(ii)$$
Combining equation (i) and (ii), we get
$$F\propto \frac{q_1q_2}{r^2}$$
$$F=K \frac{q_1q_2}{r^2}$$
Here, K is the proportionality constant whose value depends upon the medium in which charges are present and the system of a unit chosen.
For S.I. system and charges present in the air or Vaccum
$$K = \frac{1}{4\pi \epsilon _o}(\text{ Here} \epsilon _o \text {is permitivity of vaccum or free space.})$$
$$\therefore F = \frac{1}{4\pi \epsilon _o } \frac{q_1q_2}{r^2}$$
In C.G.S K = 1
$$\therefore F=\frac{q_1q_2}{r^2}$$
When two charges \(q_1 \text{and} q_2\) are at the distance'r' apart from each other in vacuum \(\epsilon _o\) the force is given by
$$F_v = \frac{1}{4\pi \epsilon _o } \frac{q_1q_2}{r^2}\dots(i)$$
When the charges are placed at the same distance in a medium having permittivity \(' \epsilon '\) then the force is
$$ F_m = \frac{1}{4\pi \epsilon _o } \frac{q_1q_2}{r^2}$$
Now dividing equation (i) by (ii), we get
$$\frac {F_v = \frac{1}{4\pi \epsilon _o } \frac{q_1q_2}{r^2}}{F_m = \frac{1}{4\pi \epsilon _o } \frac{q_1q_2}{r^2}}$$
$$\frac{F_v}{F_m} = \frac{\epsilon }{\epsilon _o} = \epsilon _r$$
Hence, the dielectric constant or relative permittivity of a medium can be defined as the ratio of the permittivity of a medium and the permittivity of vacuum of free space.
In terms of force between charges, the dielectric constant of a medium can be defined as the ratio between two charges at certain distance in vacuum and the force between the same charges placed at the same distance is such medium.
The region around a charge where its electrostatic force of attraction or repulsion can be experienced is called an electric field of that charge. Outside the electric field of a charge, its influence is 0.
The electric field intensity of a point inside the electric field of a charge is the force experienced by a unit positive charge (+1 coulomb) placed at that point. It is a vector quantity having unit N/C.
Fig: Electric field intensity due to a point charge.
To calculate electric field intensity(E) at a point 'p' near the charge (+qo) at point (p). The force experienced by the charge 'qo' is
$$ F = \frac{1}{4\pi \epsilon _o } \frac{qq_o}{r^2}$$
So, by the definition of electric field intensity(E)
$$E = \frac{f}{q_o}$$
$$ =\frac{f}{q_o} \left ( \frac{1}{4\pi \epsilon _o } \frac{qq_o}{r^2} \right )$$
$$\therefore E = \frac{1}{4\pi \epsilon _o } \frac{q}{r^2}$$
This is the electric field intensity produced by a point charge 'q' at distance ''r from it.
Electric Field Intensity due to Number of Charge
The electric field intensity of a point due to a number of a charge is equal to the vector sum of an electric field intensity of individual charge.
If \(\vec E_1, \vec E_2, \vec E_3, \dots , \vec E_n\) be the electric field intensity at a point due to different charges then the net electric field intensity\(\vec E\) at that point is give by
$$\vec E = \vec E_1, \vec E_2, \vec E_3, \dots , \vec E_n $$
The electric Lines of force are the imaginary lines in an electric field such that a tangent drawn at any point on it gives the direction of an electric field intensity at that point.
The number of electric lines of force crossing an area gives the measure of electric field intensity.
Properties of Electric Lines of Force
The number of electric lines of force passing through an area held perpendicularly is called electric flux. Larger the value of electric flux greater will be the electric field intensity.
Electric field intensity can be defined as the electric flux passing through unit area held perpendicularly. i.e.
$$\text{Electric field intensity (E)} = \frac{Electric flux(\phi)}{Area(A)}$$
$$E = \frac{\phi}{A}$$
$$\therefore \phi = EA
In vector form
$$\phi = \vec E. \vec A$$
Hence, electric lines flux can be defined as the scalar product of electric flux intensity and vector area.
Electric Dipole and Dipole
Two equal and opposite charges separated at certain finite distance constitutes electric dipole.
The dipole moment of an electric dipole is defined as the product of the two equal charges and perpendicular distance between them i.e. dipole moment \((\vec p) = q\vec d\). The dipole moment of an isolated atom is zero because the centre of positive and negative charge coincides. The dipole moment exists only when the positive and negative centres are separate.
Coloumb's law states that "the force of attraction or repulsion between two charges is directly proportional to the product of charges and inversely proportional to the square of the distance between them."
The dielectric constant or relative permittivity of a medium can be defined as the ratio of the permittivity of a medium and the permittivity of vacuum of free space.
the dielectric constant or relative permittivity of a medium can be defined as the ratio of the permittivity of a medium and the permittivity of vacuum of free space.
The region around a charge where its electrostatic force of attraction or repulsion can be experienced is called an electric field of that charge.
The electric field intensity of a point inside the electric field of a charge is the force experienced by a unit positive charge (+1 coulomb) placed at that point. It is a vector quantity having unit N/C.
The electric field intensity of a point due to a number of a charge is equal to the vector sum of an electric field intensity of individual charge.
The number of electric lines of force passing through an area held perpendicularly is called electric flux.
Electric lines flux can be defined as the scalar product of electric flux intensity and vector area.
The dipole moment of an electric dipole is defined as the product of the two equal charges and perpendicular distance between them i.e. dipole moment.
© 2019-20 Kullabs. All Rights Reserved.